The network administrator at Other Company is not familiar with BGP and could not configure the Other Company side of the link. Part 2: Configure eBGP for Other Company Inc. Use 1.1.1.1 as the neighbor IP address and add the ACME internal network 192.168.0.0/24 to BGP.ĪCME1(config- router)# neighbor 1.1.1.1 remote-as 65003ĪCME1(config- router)# network 192.168.0.0 mask 255.255.255.0įrom any device inside of the ACME network, ping the Other Company internal server again. ACME has AS number is 65001, and the ISP is using AS number 65003.

Configure ACME1 to become an eBGP peer with ISP-Entry-1.

The pings should fail because no BGP routing is configured at this time.

From any device inside of the ACME network, ping the Other Company server at 172.16.10.2.

From ISP-Entry-1, verify that the ISP has provided IP reachability through its network by pinging 1.1.1.9, which is the IP address of the ISP-Entry-2 Serial 0/0/0 interface.

ISP-Entry-1 is the ISP border router that is directly connected to ACME. Because the ISP is using BGP as the routing protocol, you must configure ACME1, which is the ACME border router, to establish a BGP neighbor connection with ISP-Entry-1. You must connect ACME to the ISP so that ACME and Other Company can communicate. The ISP has established network reachability within its network and to Other Company. hired an ISP to provide a connection to a partner company called Other Company. Instructions Part 1: Configure eBGP in ACME Inc.ĪCME Inc.

Ccnp packet tracer labs